Houdini Provisioning Instructions

• First make sure your connection between the handset and computer are secure and snap in correctly. If a connection still cannot be attained, go to Settings>Connection>Data Settings>PC connection>down and select RS-232C and press Ok>Then select Baud rate of 115200. Continue normally with the Houdini Detect button and complete the Houdini process.

Additional Issues

• Always make sure the drivers for the handset have been installed correctly.
• If your handset is not being detected view the most common issues below
  • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
  • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.
  • Handset has not been added to the Houdini database.
  • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

 Manual Programming:

• Power on the handset
• At the main screen hit the Menu key
• Press the number 0
• Enter the SPC (000000)
• Select the Service Program option
• Handset will show its ESN, click Ok to continue
• Enter MDN phone number  (10 Digit number) , click Ok to continue
• Enter MIN phone number (10 Digit number) , click Ok to continue
• Verify that the SID is correct, click Ok to continue
• Click Ok at the NAM menu
• Click on exit
• Handset will power cycle and programming is complete