Motorola MB810 Droid X

Supported Carriers:

MetroPCS, Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk

Phone Pre-Setup:

Houdini Provisioning Instructions
- This phone uses the MTC cable.
- If the phone is not dialing remove the battery and replace.

PreProvisioning Instructions
- Power off the handset. Hold the Red Camera button on the side of the phone and press the power button to power on the handset while still holding onto the camera button until the it is fully booted.
- If you are using a 64 bit PC be sure to use Houdinisoft Drivers. Located in the Houdini application.
- Settings > Drivers > Download latest Driver Version.

Additional Issues
- Always make sure the drivers for the handset have been installed correctly. This device requires the Motorola Android drivers which can be installed from the Helpdesk.
- If your handset is not being detected view the most common issues below
- Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
- USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
- Handset has not been added to the Houdini database.
- Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

Device and Programming Instructions:

Touch the Phone Icon, then dial # # 7764726, then touch the Call button
Enter your SPC passcode (default 000000 or 468346) then tap Verify
Select User Activation
Touch in the MIN box, delete the existing information and enter your 10 digit MIN
Touch in the MDN box, delete the existing information and enter your 10 digit phone number without any dashes or spaces
Touch in the CDMA Sys ID and enter your SID (if not known, contact your carrier support)
Touch Done to save your information and return to User Activation menu
Press the Home Key to exit out of your programming
The screen should display: Programming Complete-Device will restart automatically

Cable: MTC

Symbol: Bear

Cable Image:

Find Programming