First make sure the Samsung R430 is  in the on position. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. Continue normally with the Houdini Detect button and complete the Houdini process.  

 

Always make sure the drivers for the handset have been installed correctly.

If your handset is not being detected view the most common issues below

Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.

USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.

Handset has not been added to the Houdini database.

Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

Manual Programming

 

Power on the handset

Enter ##626*

Enter  000000 or 141887 or 333333

Enter in MDN phone number (10 digit number), then click OK

Enter in MIN phone number (10 digit number) then click OK. Set SID and click ok.

Press the red power/end button to exit. 

Your phone will reset and programming is now complete

 

 

Alternative Programming:

 

Power on the handset

Select Menu then Settings

Highlight over Display and press *

Enter  000000 or 141887 or 333333

Select Network Settings then Nam1

Enter in MDN phone number (10 digit number), then click OK

Enter in MIN phone number (10 digit number) then click OK. Set SID and click ok.

Select Done then press ok. 

Your phone will reset and programming is now complete