Houdini Provisioning Instructions

• LG 8500
• First make sure your connection between the handset and computer are secure and snap in correctly. Sometimes Houdini may find two com ports when detecting some LG handsets. Always select the Com port with the LG name next to it as the highlighted example below.
• Example: LG VX-8500 Com Port 1 and LG VX-8500 Com Port 3 (LG)
• Continue normally with the Houdini Detect button and complete the Houdini process. 

Additional Issues

• Always make sure the drivers for the handset have been installed correctly.
• If your handset is not being detected view the most common issues below

 Manual Programming:

• Power on the handset
• At the main screen hit the Menu key
• Press the number 0
• Enter the SPC (000000)
• Select the Service Program option
• Handset will show its ESN, click Ok to continue
• Enter MDN phone number  (10 Digit number) , click Ok to continue
• Enter MIN phone number (10 Digit number) , click Ok to continue
• Verify that the SID is correct, click Ok to continue
• Click Ok at the NAM menu
• Click on exit
• Handset will power cycle and programming is complete
   

Alternate Programming:

• ##77647268500 Send
• Enter the SPC (000000)
• Select the Service Program option
• Handset will show its ESN, click Ok to continue
• Enter MDN phone number  (10 Digit number) , click Ok to continue
• Enter MIN phone number (10 Digit number) , click Ok to continue
• Verify that the SID is correct, click Ok to continue
• Click Ok at the NAM menu
• Click on exit
• Handset will power cycle and programming is complete

Telus Manual Programming:

• Power on handset
• Enter ##83587 followed by 000000
• Select NAM 1 followed by OK
• Enter 10 digit MDN followed by OK
• Enter 10 digit MIN followed by OK
• Hit the back button 5 times and the handset will power cycle
• Programming is now complete