<<Sanyo

Manual Programming:

• Power on the handset

• Enter ##000000#

• Service programming screen appears

• Highlight edit then click OK

• Enter in  MDN phone number (10 digit number),  then click ok

• Enter in the MIN phone number (10 digit number), then click ok

• Click Done

• Phone will power cycle and programming is complete

Troubleshooting:

• Houdini Provisioning Instructions

  • First make sure the Sanyo S1 is in the on position. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. Continue normally with the Houdini Detect button and complete the Houdini process.

• Additional Issues

  • Always make sure the drivers for the handset have been installed correctly.

  • If your handset is not being detected view the most common issues below

    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.

    • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.

    • Handset has not been added to the Houdini database.

    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

For more Support please email support@houdinisoft.com . Please include your contact information with a full description of your issue. Thank you

Houdini Support