<<Sanyo

Manual Programming:

• Power the phone on

• Enter ##000000# 

• Select edit then click OK

• Enter in MDN phone number (10 digit number), then click OK

• Enter in MIN phone number (10 digit number) then click OK

• Select Done and click OK

• Phone will power cycle and programming in now complete

Troubleshooting:

• Houdini Provisioning Instructions

  • First make sure the Sanyo SCP 6650Q is in the on position. Make sure your connection between the handset and computer are secure and snap in correctly. The cable will need to be connected to the handset in the upside down postion with the label facing down. Continue normally with the Houdini Detect button and complete the Houdini process.

• Additional Issues

  • Always make sure the drivers for the handset have been installed correctly.

  • If your handset is not being detected view the most common issues below

    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.

    • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.

    • Handset has not been added to the Houdini database.

    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

For more Support please email support@houdinisoft.com . Please include your contact information with a full description of your issue. Thank you

Houdini Support