HTC 6435L (Droid DNA)

 Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

 

 Phone Setup:

NOTE: Only 1X is guaranteed on the Page Plus network unless the phone is being activated as a New Activation. Update to Follow.

 

 Pre-Provisioning
  • Must have 4G LTE SIM Card
  • Dial ##3424 then press Call
  • Phone is now in DIAG Mode

     Post Provisioning (Perform only if Calls/Data are not working)
    1. Connect phone to WiFi
    2. Open Google Play Store
    3. Search for "Phone Info" application 
    4. Download and install the Phone Info app by SC@taiwan
    5. Open Phone Info Application
    6. Click "Phone Info"
    7. Then click "Phone Information"
    8. Find the button that says "Turn OFF Radio" and click it
    9. Next, change the Network Selection Mode to "CDMA Auto PRL"
    10. Click the button that says "Turn ON Radio"
    11. Ensure "CDMA Auto PRL" is still selected
    12. Press back until you are at the homescreen
    13. Hit your Home button to exit, you shouldn't even have to restart. Voila- You're in 3G CDMA Mode.
    14. Test Call
    15. Data may take up to 15 Minutes to appear

     

     Alternative Activation

    If the device is not functioning properly after a flash has completed, attempt to active with the Decimal form of the MEID (ex. 256XXXXXXXXXXXXXXX) instead of the HEX "IMEI" (ex. 990000XXXXXXXX)

     

     Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
    • SB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
    • Handset has not been added to the Houdini database.
    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

     

    Programming Instructions
    Fully flashed devices do not need to be manually programmed
    1. Dial ##7764726 then press Call
    2. Enter SPC 000000 or 555555
    3. Select NAM-General
    4. Select Mobile Directory Number
    5. Enter MDN (10 digit phone number) then press OK
    6. Press Back
    7. Select NAM CDMA Settings
    8. Select MIN1
    9. Enter MIN without area code (7 digit phone number) then press OK
    10. Select MIN2
    11. Enter only MIN area code (3 digit number) then press OK
    12. Scroll down to Home SID/NID #1
    13. Verify HomeSID is correct
    14. Press Menu (top right) and select Commit Modifications
    15. Phone will power cycle and programming is now complete

     

     Notes:

     

    Cable: MTC

    Symbol: Bear

    Compatible Cellebrite Cable: 100

    Cable Image:

    6435L (Droid DNA)

    Loading Activity...