HTC ADR6230 (Wildfire S)

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

 

  • Houdini Provisioning Instructions
    • First make sure the HTC Wildfire S is in the on position using MTC cable. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. A menu will then appear and you will need to select phone as a modem. Continue normally with the Houdini Detect button and complete the Houdini process.


  • Pre-Provisioning Instructions
    • Phone must be in Diagnostic mode, Instructinos below:
    • Open Phone Keypad and dial ##3424#
    • Phone is now in the correct mode to load drivers and continue with the provisioning process
    • If the device does not detect, check whether USB Debugging is enabled or disabled
    • If enabled, disable it, and unplug and replug the device
    • If disabled, enable it and unplug and replug the phone and try again


  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
    • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.
    • Handset has not been added to the Houdini database.
    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

 

 

Device and Programming Instructions:

 

 

  • Dial ##778#
  • Select Edit
  • Enter SPC 000000 and press OK
  • Select Nam Settings
  • Select MDN and press 12# key to display numbers
  • Enter new MDN(10 digit phone number) and press OK
  • Select MSID and press 12# key to display numbers
  • Enter new MIN(10 digit number) and press OK
  • Press the BACK key to return to previous screen
  • Press MENU and click Commit Modifications
  • Phone will power cycle and programming is now complete
  •  

     

     

    Reference Links:

     

    Notes:

     

    Cable: MTC

    Symbol: Bear

    Compatible Cellebrite Cable: 100

    Cable Image:

    ADR6230 (Wildfire S)

    Loading Activity...