HTC ADR6300VW (Droid Incredible)
(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, MobileNation, Smart, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless
- Houdini Provisioning Instructions
- This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
- If the phone is not dialing remove the battery and replace.
- Set Phone In DIAG mode before Provisioning.
- (For Verizon)
- Press green talk button to bring up Dial pad.
- Enter ##3424 then press "Green Talk Button" on the bottom left of the phone and press "Start"
- Load Drivers if prompted, files can be found in Downloads section of the helpdesk.
- Additional Issues
- Always make sure the drivers for the handset have been installed correctly.
- If your handset is not being detected view the most common issues below
- Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
- USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
- Handset has not been added to the Houdini database.
- Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.
Device and Programming Instructions:
Verizon manual programming:
- Follow Troubleshooting below before provisioning this handset.Once troubleshooting is completed, Start Houdini as normal and run through as normal
- After provisioning with Houdini, manually restart the phone (Remove and replace the battery)
- Press the (Phone) button on the screenl to get to the dial pad and Enter ##778 call
- Select to Edit and enter the SPC of 000000 or 468346 and press OK
- Select Nam Settings to edit MDN and MIN
- Select MDN and enter 10-digit phone number and press ok
- Select MIN1/MIN2 and enter area code and 7-digit phone number in correct locations.
- Select MSID and enter the 10-digit MIN number once again.
- Next, press back and select HomeSID and verify it is correct for your location
- When done press MENU to commit modifications and phone will restart to complete programming
If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:
- ##3282# > Advance > RTSP/HTTP Setting
- Above method was tested changing All IP's to 0.0.0.0 , and all Ports to 0
Compatible Cellebrite Cable: 100