HTC PD06100 Wildfire

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.

  • Set Phone In DIAG mode before Provisioning.
    • Press green talk button to bring up Dial pad.
    • Enter ##3424# then you will see the DM Command Service screen and the phone is now in DIAG mode.
    • Load Drivers if prompted, files can be found in Downloads section of the helpdesk.

  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

Device and Programming Instructions:

Manual programming:

    • After provisioning with Houdini, manually restart the phone (Remove and replace the battery)
    • Press the green talk symbol to get to the dial pad. Enter ##778#
    • Tap the keypad icon at the bottom of the screen to display the keypad and Enter 000000 or 468346
    • Select NAM Settings
    • Click on Mobile Directory Number and then edit at the bottom left of the screen. Enter the MDN and hit ok.
    • Next click on the MSID field and hit edit. Enter the MIN/MSID and hit "ok'.
    • Press Menu followed by Commit Modifications to save information and allot handset to reset.
    • Unplug the Device and the phone programming is complete.

If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

  • ##3282# > Advance > RTSP/HTTP Setting
  • Above method was tested changing All IP's to 0.0.0.0 , and all Ports to 0

Reference Links:

Notes:

Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

PD06100 Wildfire

Loading Activity...