Motorola MB853 Electrify [UNDER DEVELOPMENT- OS 2.3.5 NOT SUPPORTED]

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

 

  • Houdini Provisioning Instructions
    • IF THIS DEVICE IS MOTOROLA ELECTRIFY IS ANDROID OS 2.3.5, THE BOOTLOADER IS LOCKED AND CANNOT BE FLASHED. 
    • First make sure the Motorola Electrify is in the on position using MTC cable. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. A menu will then appear and you will need to select phone as a modem. Continue normally with the Houdini Detect button and complete the Houdini process.

  • Pre-Provisioning
    • Phone must be in Motorola Phone Portal for Houdini Detection
    • Pull down Notification bar and select USB Connection
    • Set phone to Motorola Phone Portal
    • Phone is now in correct mode to install drivers and continue with the provisioning process
    • If phone does not detect, perform the following:
    • Power down the handset
    • Connect USB Cable and allow usb to power on the device
    • If device does not power on automatically, power on the device after connected to the USB cable
  • Alternate Pre-Provisioning
    • If the above steps do not work, try the following:
    • Power OFF device
    • Hold down the Volume Down and hold the power button
    • The word "Fast Boot" should appear, Use the Volume Down button to scroll to BP Tools
    • Use the Power Button button to select BP Tools
    • Plug in device
    • Allow drivers to load
    • Run Detection

  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
    • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.
    • Handset has not been added to the Houdini database.
    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

 

Device and Programming Instructions:

 

  • Dial #073887* and press Call
  • Enter SPC 000000 and select Verify
  • Select User Activation
  • Touch in the MIN box, delete the existing information and enter your 10 digit MIN
  • Touch in the MDN box, delete the existing information and enter your 10 digit phone number without any dashes or spaces
  • Touch in the CDMA Sys ID and enter your SID (if not known, contact your carrier support)
  • Touch Done to save your information and return to User Activation menu
  • Press the Home Key to exit out of your programming
  • Phone will power cycle and programming is now complete

 

Reference Links:

 

Notes:

 

Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

MB853 Electrify [Undergoing Development]

  • IF THIS DEVICE IS MOTOROLA ELECTRIFY IS ANDROID OS 2.3.5, THE BOOTLOADER IS LOCKED AND CANNOT BE FLASHED. 
Loading Activity...