Samsung SCH-I200 Stellar Verizon

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, MobileNation, Smart, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

 

  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.
    • NOTE: Only 1X is guaranteed on the Page Plus network unless the phone is being activated as a New Activation. Update to Follow.
    • Pre-Provisioning (4.1.2 Versions)
      • If the above options are not working, then perform the following:
      • Open the Dial Pad
      • Dial ##366633#
      • Tap ON
      • Phone is ready to be provisioned
  • Pre-Provisioning (4.0.4 and below)
    • Ensure previously activated (used) Verizon 4G LTE SIM is inserted into device during flash. Phone may be flashed without a SIM card, although data will work, data signal may not be seen and phone will show a notification that a SIM should be inserted.
    • Open Dial Pad
    • Dial *#22745927
    • At Hidden Menu Screen Select Hidden Menu
    • Select Enabled and Press OK
    • Press Back to Bring Up Dial Pad
    • Dial *#7284# or **87284
    • Select Qualcomm USB Settings
    • Select DM + MODEM + ADB
    • Press Back Till Phone Is At Home Screen
    • Phone Is Ready To Be Provisioned
    • (Remember after flashing to return and put phone back to MTP+ADB)

     

    • Post- Provisioning Instructions
      • ONLY PROCEED IF DATA IS NOT FUNCTIONING AFTER 15 MINITES.
      • THIS MAY RESULT IN A LOSS OF DATA IF YOU CONTINUE AND DATA IS ALREADY FUNCTIONING.
      • Bring up your dial pad
      • Enter *#22745927 on the dial pad
      • Click on the Hidden Menu Option to Enable the hidden menu (It will reset itself to disabled each time the phone power cycles)
      • Enter *#197328640# on the dial pad
      • At the Service Menu, follow the options below
        • 2-CDMA
        • 1-Common
        • 9-NextPage
        • 9-NextPage
        • 8-PREF MODE SET
        • 1-CDMA_HDR_LTE_Only
        • Menu Button
        • Back
        • Reboot Phone
        • 2-CDMA
        • 4-Control
        • 9-CDMA BAND SELECT
        • 4-Automatic
    • Alternative Activation
      • If the device is not functioning properly after a flash has completed, attempt to active with the Decimal form of the MEID (ex. 256XXXXXXXXXXXXXXX) instead of the HEX "IMEI" (ex. 990000XXXXXXXX)
    • Additional Issues
      • Always make sure the drivers for the handset have been installed correctly.
      • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • SB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

     

     

    Device and Programming Instructions:

     

    • Open Dial Pad
    • Dial *#22745927
    • At Hidden Menu Screen Select Hidden Menu
    • Select Enabled and Press OK
    • Dial **772
    • Select Edit
    • Enter SPC 000000 (Revol: 555555)
    • Select MDN
    • Enter new MDN (10 digit phone number) and press OK
    • Select MSID
    • Enter new MIN (10 digit number) and press OK
    • Press Back then Done
    • Phone will power cycle and programming is now complete

     

    Reference Links:

     

    Notes:

     

    Cable: MTC

    Symbol: Bear

    Compatible Cellebrite Cable: 100

    Cable Image:

    SCH-I200 Stellar

    Loading Activity...