Samsung SCH-U340

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

 

  • Houdini Provisioning Instructions
    • First make sure the Samsung U340 is in the on position. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. Continue normally with the Houdini Detect button and complete the Houdini process.  
  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows 2000,XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

 

Device and Programming Instructions:

 Manual Programming:

  • Power on the handset
  • Enter ##626*
  • Enter  000000
  • Select MDN and enter number followed by ok
  • Select MIN and enter number followed by ok
  • Now hit the left soft key to exit
  • Some Verizon prepaid handsets require that you set the NAM selection to NAM 1.
  • Under the setting menu scroll to phone settings and select NAM selection. Insure the NAM is set to NAM 1.

If the following programming did not work try the programming below:

  • Manual Programming
    • Power the phone on
    • Press the menu key
    • Go to settings and highlight over the display menu
    • Press * followed by 000000
    • Select network settings then NAM 1
    • Enter in MDN phone number (10 digit number), then click OK
    • Enter in MIN phone number (10 digit number) then click OK
    • Select Done and click OK
    • Phone will power cycle and programming in now complete

    USCellular Samsung U340 Programming:

    • Power the phone on
    • Press the menu key
    • Go to settings
    • Press # followed by 000000
    • Press the OK button
    • Enter in MDN phone number (10 digit number), then click OK
    • Enter in MIN phone number (10 digit number) then click OK
    • Press the Red END key
    • Phone will power cycle and programming in now complete
  • Manual Programming
    • Power on the phone
    • Press Menu then press 0
    • Enter SPC code 000000
    • Select NAM programming
    • Select NAM 1
    • Select Phone Number and enter MDN (10-digit)
    • Select MIN and enter MIN then press ok
    • Verify that the HomeSID is correct
    • Press Exit when complete
    • Phone will power cycle and programming in now complete

 

Reference Links:

Notes:

Cable: 

Symbol: 

Compatible Cellebrite Cable: 

Cable Image: 

SCH-U340

Loading Activity...