HTC ADR6350 Droid Incredible 2

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:



  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.


  • Set Phone In DIAG mode before Provisioning.
    • (For Verizon)
    • Press green talk button to bring up Dial pad.
    • Enter ##3424 then press "Green Talk Button" on the bottom left of the phone and press "Start"
    • Load Drivers if prompted, files can be found in Downloads section of the helpdesk.


  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.



Device and Programming Instructions:


Verizon manual programming:

    • Follow Troubleshooting below before provisioning this handset.Once troubleshooting is completed, Start Houdini as normal and run through as normal
    • After provisioning with Houdini, manually restart the phone (Remove and replace the battery)
    • Press the (Phone) button on the screenl to get to the dial pad and Enter ##778 call
    • Select to Edit and enter the SPC of 000000 or468346 and press OK
    • Select Nam Settings to edit MDN and MIN
    • Select MDN and enter 10-digit phone number and press ok
    • Select MIN1/MIN2 and enter area code and 7-digit phone number in correct locations.
    • Select MSID and enter the 10-digit MIN number once again.
    • Next, press back and select HomeSID and verify it is correct for your location
    • When done press MENU to commit modifications and phone will restart to complete programming


If issues connecting with Youtube occurs after a data flash and data is functioning properly, please follow the steps below:

  • ##3282# > Advance > RTSP/HTTP Setting
  • Above method was tested changing All IP's to , and all Ports to 0






Reference Links:




Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

Droid Incredible 2

Loading Activity...