HTC PJ75100 (EVO 4G LTE)

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

  • Houdini Provisioning Instructions
    • This phone uses the MTC cable. Remove the plastic cover on the bottom of the phone to attach the cable.
    • If the phone is not dialing remove the battery and replace.
    • NOTE: Only 1X is guaranteed on the Page Plus network unless the phone is being activated as a New Activation. Update to Follow.
    • For best results, phone should have been previously activated on the original carrier to activate SIM.
  • Pre-Provisioning Instructions
    • Press green talk button to bring up Dial pad.
    • Enter ##3424# and you will see DM Command Service. Phone is now in DIAG mode.
    • Plug in Device. Load Drivers if prompted, files can be found in Downloads section of the helpdesk.
  • Post Provisioning
    • Set the phones "Network Mode" to CDMA Only
    • Pull down notification bar > Settings > Mobile Network > Network Mode > CDMA Only
    • If Data is still not turning on, then turn off and on Mobile Network and it should enable data
  • Alternative Activation
    • If the device is not functioning properly after a flash has completed, attempt to active with the Decimal form of the MEID (ex. 256XXXXXXXXXXXXXXX) instead of the HEX "IMEI" (ex. 990000XXXXXXXX)
  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
    • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
    • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows XP,Vista.
    • Handset has not been added to the Houdini database.
    • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.

Device and Programming Instructions:

  • Manual Programming
    • ##000000#
    • Select Edit
    • Select Mobile Directory Number (MDN)
    • Enter MDN (10 digit phone number) and press OK
    • Touch MSID
    • Enter MIN (10 digit number) and press OK
    • Select Menu on top right of the screen
    • Select Commit Modifications
    • Phone will power cycle and programming is now complete
  • Youtube Fix
    • If issues connecting with Youtube occur after a data flash and data is functioning properly, please follow the steps below:
    • ##3282# > Advance > RTSP/HTTP Setting
    • Above method was tested changing All IP's to , and all Ports to 0

Reference Links:


Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

PJ75100 (EVO 4G LTE)

Loading Activity...