Motorola XT894 Droid 4

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:

  • Houdini Provisioning Instructions
    • First make sure the Motorola Droid 4 is in the on position using MTC cable. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. A menu will then appear and you will need to select phone as a modem. Continue normally with the Houdini Detect button and complete the Houdini process.
  • Pre-Provisioning
    • Phone must be in PC Mode for Houdini Detection
    • Pull down Notification bar and select USB Connection
    • Set phone to PC Mode
    • Phone is now in correct mode to install drivers and continue with the provisioning process
    • If phone does not detect, perform the following:
    • Power down the handset
    • Connect USB Cable and allow usb to power on the device
    • If device does not power on automatically, power on the device after connected to the USB cable
  • Pre-Provisioning for devices with Android OS 4.0.4
    • Power OFF device
    • Hold both the Volume Up and Volume Down and turn the phone ON
    • A menu should appear, Use the Volume Down button to scroll to BP Tools at the Bottom
    • Use the Volume Up button to select BP Tools
    • Plug in device
    • Allow drivers to load
    • Run Detection
  • Post-Provisioning
    • After the flash is complete perform the following if Data has not started working try manually restarting the device
    • If data is still unavailable perform the following:
    • Dial ##7764726 and press Call
    • Enter SPC 000000 and select Verify
    • Scroll down to LTE Settings (Should be next  to the last option)
    • Then locate and press "Disable Class3 APN"
    • You should see a popup stating "2 rows of apn updated."
    • Now press the Home key and Data should kick on
  • Alternative Activation
    • If the device is not functioning properly after a flash has completed, attempt to active with the Decimal form of the MEID (ex. 256XXXXXXXXXXXXXXX) instead of the HEX "IMEI" (ex. 990000XXXXXXXX)
  • Try an ESN change with Page plus:


    1. Turn off 
    2. Get a non-lte Verizon phone and put it’s ESN on the account
    3. Dial *228 on the Verizon phone, then place a test call
    4. If the call goes through successfully, turn off the Verizon phone
    5. Turn on , and test call then check data


    If that does not work, then

    1. Factory reset
    2. Take out SIM
    3. Flash phone without the SIM (DO NOT BYPASS ACTIVATION)
    4. Once flash is complete, turn off and turn back
    5. Place a test call using emergency call feature
    6. Phone will say it needs SIM
    7. Replace SIM in the phone
    8. Turn phone on, complete activation steps
    9. Make test call and check data

Device and Programming Instructions:

  • Dial ##7764726 and press Call
  • Enter SPC 000000 and select Verify
  • Select User Activation
  • Touch in the MIN box, delete the existing information and enter your 10 digit MIN
  • Touch in the MDN box, delete the existing information and enter your 10 digit phone number without any dashes or spaces
  • Touch in the CDMA Sys ID and enter your SID (if not known, contact your carrier support)
  • Touch Done to save your information and return to User Activation menu
  • Press the Home Key to exit out of your programming
  • Phone will power cycle and programming is now complete


Reference Links:




Cable: MTC

Symbol: Bear

Compatible Cellebrite Cable: 100

Cable Image:

XT894 Droid 4

Loading Activity...