Samsung SCH-U450 (Intensity)

Supported Carriers:

(Test_List), Cricket, Cricket STX, Cricket Corporate, Revol, Mobi, Page Plus, Ntelos, Generic, Blue Wireless, Alltel, ClearTalk, Smart, MobileNation, IV Cellular, Carolina West, Next G Mobile, TalkForGood Wireless

Phone Pre-Setup:


  • Houdini Provisioning Instructions
    • First make sure the Samsung U450 is in the on position using Samsung D Cable. Make sure your connection between the handset and computer are secure and snap in correctly. Wait for the charging symbol to appear on the screen. Continue normally with the Houdini Detect button and complete the Houdini process.  
  • Additional Provisioning Instructions
    • Set phone into Modem Mode. Instructions below:
    • Menu > Settings > Phone Info > # > SPC(000000)
    • Select Port Map > USB(MTP,MS), Ask On Plug
    • When phone is plugged in be sure to disconnect from MTP connection.
    • Afterwards you can continue with Houdini and detect the phone.
  • Additional Issues
    • Always make sure the drivers for the handset have been installed correctly.
    • If your handset is not being detected view the most common issues below
      • Damaged data port on the handset itself. Check for water damage or damage to the data port on the handset.
      • USB driver conflict (Most Common) Download and install the drivers we supply on our website. Houdini is fully compatible with Windows ,XP,Vista.
      • Handset has not been added to the Houdini database.
      • Net 2.0 framework is needed to run Houdini. Download from the support tab on our site.


Device and Programming Instructions:

 Manual Programming:

  • Power on the handset
  • Go to Menu > Settings > Phone Info > Press *
  • Enter 000000 for SPC Code
  • Select Network Settings
  • Choose Phone Number and enter (MDN), press OK
  • Choose NMSID to enter MIN (00 followed by the MIN) Press OK
  • Press Exit when done
  • Phone will restart and Programming is complete
  • Alltel Programming:

  • Power on the handset
  • Press ##626#
  • Select Nam1 followed by Edit
  • Enter 000000 for the SPC
  • Choose MDN (10 digit phone number), press OK
  • Choose MIN to enter (10 digit MIN number) Press OK
  • Verify that the HomeSID is correct then select Done to Exit
  • Phone will restart and Programming is complete

    Reference Links:




    Compatible Cellebrite Cable: 

    Cable Image: 

    SCH-U450 (Intensity)

    Loading Activity...